FatWallet.com: WEN 10-Inch Sliding Compound Miter Saws - Your Choice $124.99$174.99 @ Woot, posted on 09-11-2014 01:03 PM

[fromFatWallet.com]

WEN 10-Inch Sliding Compound Miter Saws - Your Choice $124.99$174.99 @ Woot

Rating: 0 Posted By: ctgolfer
Views: 344 Replies: 0

shipping adds $5

Specifications - 70751 Dual Bevel Motor: 120V; 60Hz Input: 15 Amps Speed: 5,000 RPM (No Load) Miter Table Angles: 0 to 45 left and right Laser Class: Class IIIA Laser Wave Length: 650 nm Laser Max Output: < 5 nW Table Stops: 0, 15, 22.5, 31.6, 45, 52.5 left and right, 60 left only Bevel Stops: 0- 45 left and right Cutting Capacity:

• Straight cut at 0 miter, 0 bevel:3-3/8" x 12"
• Miter at 45 miter, 0 bevel:3-3/8" x 8-1/2"
• At 52left miter, 0 bevel:3-3/8" x 6"
• At 52right miter, 0 bevel: 3-3/8" x 7-5/8"
• Bevel cut at0 miter, 45 right bevel:1" x 12"
• At 0 miter, 45 left bevel:2" x 12"
• Compound miter cut at 45 right miter, 45 right bevel:1" x 8-1/2"
• At 50 right miter, 45 right bevel:1" x 7-5/8"
• At 45 left miter, 45 left bevel:2" x 8-1/2"At 52 left miter, 45 left bevel:2-1/4" x 6"

-- OR --
Specifications - 70716 Motor: 120V; 60Hz Input: 15 Amps Speed: 5,500 RPM Blade Size: 10" x 5/8" bore Number of Teeth: 60 Miter Table Angles: 0 to 52 left and right Bevel Cuts: 0 to 45 left only Weight: 29.7 pounds Cutting Capacity:

• Straight cut at 0 miter, 0 bevel:3-1/4" x 11-5/8"
• Miter at 45 miter, 0 bevel:3-1/4" x 8-1/16"
• Bevel cut at0 miter, 45 left bevel:1-5/8" x 11-5/8"Compound miter cut at 45 left miter, 45 left bevel:1-5/8" x 8-1/16"

In the Box:

• (1) WEN 70751 10-Inch Dual Bevel Sliding Compound Miter Saw
• 40-Tooth Carbide Tipped General Purpose Blade
• Hold Down Clamp
• 6mm Hex Key
• 2 Material Support Arms
• Dust Collection BagInstruction Manual

-- OR --

• (1) WEN 70716 10-Inch Sliding Compound Miter Saw
• 60-Tooth Carbide Tipped Blade
• Dust Collection Bag
• Support Arms
• Fence and Hold Down ClampInstruction Manual

http://tools.woot.com/offers/wen-sliding-compound-miter-saws


Tools Deals

woot! Coupons




Original post